[Transfer] How to install Windows system on Kimisufi independent server

Tutorial on installing Windows system on Kimisufi independent server

The Windows images ultimately used in this article are all made by netizens and have nothing to do with this site.

1. Enter the console (Control Panel on the home page), first turn off Monitoring, and then click Netboot

2. Click to enter Rescue mode

3. Click OK

4. Click Restart to restart the server

5. Be patient and wait a few minutes to check the email in your mailbox. The subject is roughly "Access settings for RESCUE mode" and find the following information

6. Use putty (or other software, p.s. If you use OpenSUSE like me, you don’t need additional software~) to log in to the SSH of the dedicated server.

7. Carry out the following commands according to the system you want to install

Windows 2012 R2 (Online machines are also applicable, but not all Kimsufi dedicated servers are applicable)

wget -O- 'http://ktd.joodle.nl/KS2012R2.gz' | gunzip | dd of=/dev/sda

Windows 2008 R2 (recommended. Available for all Kimsufi models)

wget -O- 'http://ktd.joodle.nl/KS2008R2.gz' | gunzip | dd of=/dev/sda

Windows 8.1 (recommended. Applies to Online and Kimsufi)

wget -O- 'http://ktd.joodle.nl/KS8.1.gz' | gunzip | dd of=/dev/sda

Windows 7 (Ultimate Edition) (not available for all Kimsufi models)

wget -O- 'http://ktd.joodle.nl/KS7.gz' | gunzip | dd of=/dev/sda

8. Change Netboot back to Hard Disk in the console. After confirming, you should also restart the machine

9. Log in user name and password (use the "Remote Desktop Connection" that comes with Windows)

Windows Server 2012 R2 & 2008 R2

Username: Administrator Password: Password147

Windows 7 & Windows 8.1

Username: Admin Password: Password147

Recommended site searches: virtual space host, check IP, telecom host rental, how to check IP, China Unicom virtual host, anti-complaint vps host, free virtual host server, website registration number, Shandong website registration, server,