Tutorial on changing IP for bricklayers: Free IP replacement has been offline, and you can only pay $8.79 to change it.

888u

Last update at :2024-03-20,Edit by888u

After the Bricklayer IP is blocked and cannot be connected, you need to change the IP address. Previously, there was a free IP change service for the Bricklayer, which can be used once every 5 weeks. However, the service has been offline now. Currently, the Bricklayer can only pay. Change IP. Recently, this site has changed the IP of Bricklayer. This article records the tutorial for changing IP of Bricklayer in 2021, including the time-consuming process of changing IP of Bricklayer, the cost of changing IP of Bricklayer, and other points to note when changing IP of Bricklayer.

1. Tutorial on changing IP for bricklayers

1. Check the IP availability of the bricklayer

The first step is to check the reason why the tile mover cannot connect and see if the tile mover IP has been blocked.

Here you can use the IP detection tool provided by KiwiVM itself. First log in to KiwiVM (official website of KiwiVM >>>), find the KiwiVM VPS that cannot be connected under Services->My Services, and click KiwiVM Control Panel , then open the IP detection link: https://kiwivm.64clouds.com/main-exec.php?mode=blacklistcheck, click Test Main IP to start detection:

You must first log in to the KiwiVM Control Panel and then open the detection link, otherwise it will prompt session timed out:

There will be two test results here:

  • IP NOT BLOCKED: IP is normal;
  • IP BLOCKED: The IP is blocked.

As shown in the picture below, this is the bricklayer’s IP that has been blocked:

For more detailed detection tutorials, please refer to: "The tile mover cannot connect: IP blocked/port blocked detection method and solution sharing".

2. Initiate a request to change the IP address of the bricklayer

If the IP of your Bricklayer VPS has been blocked, then we can only pay to change the IP. Bricklayer's free IP replacement service has been offline for two years, so the ones circulated on the Internet can be changed every 5 weeks or every 10 weeks. Using a one-time bricklayer to change the IP service for free is an outdated tutorial.

Log in to the bricklayer first: the official website of the bricklayer

Open the Bwhh81 change IP page: https://bwh81.net/ipchange.php, find the Bwhh81 VPS you need to change the IP, click "Request IP Change" at the back to apply for IP change, here we You can see that the cost of changing the IP is $8.79.

3. Confirm the IP change and pay the fee

After applying to change the IP of Bricklayer, a work order will be automatically generated. The content of the work order is the information of the VPS of Bricklayer that you are applying to change the IP and the generated bill number:

Go back to the homepage of Bricklayer (official homepage of Bricklayer>>>), find the generated bill for IP replacement, and click the payment button to complete the steps of changing IP:

4. Wait for the bricklayer to complete the IP change

The tile mover changes the IP in basically real time, but sometimes it takes a while (usually very quickly). This time the site paid the fee at 10:52, and the IP was successfully changed at 11:20 Address, it took 28 minutes.

The bricklayer changed the IP payment record:

Reminder for successful IP change by the tile mover (after the IP change is completed, the tile mover will send an email notification):

2. Points to note when changing IP for bricklayers

When using Bricklayer's paid IP replacement service, we need to pay attention to the following points:

  • There is a "Request IP Change" button behind each Bricklayer instance. If you have multiple Bricklayer VPSs under your account, please be sure to click the correct button;
  • The cost of changing the IP by Bricklayer is $8.79/time. We must use it in a standardized way when using Bricklayer VPS;
  • The time it takes to change the IP of Bricklayer is basically within seconds (the change can be successful immediately after payment), but if there is a situation where it is not changed immediately, you need to wait for manual processing by Bricklayer customer service, which will not exceed 24 hours;
  • li>
  • After the Bricklayer IP replacement is completed, the original IP will be recycled;
  • The IP obtained by the bricklayer after changing the IP ensures connectivity around the world. Of course, it can also be used in mainland China.
  • The above is the tutorial for changing IP and the points to note. For more Brickworker VPS tutorials, please refer to "Brickworker Mover VPS Special Topic: Brickworker Mover Discount Codes and Bricklayer Mover Novice Tutorials", you can also join the Bricklayer Mover replenishment notification group to follow the Bricklayer Mover discount information: 659236660, and the Bricklayer Mover exchange group: 171060270 .

    Recommended site searches: foreign trade space, icp filing, free website space application, ip purchase, domain name query, foreign space, website space registration-free, domain name quick filing, virtual space free trial, webmaster ip,

    Tutorial on changing IP for bricklayers: Free IP replacement has been offline, and you can only pay $8.79 to change it.

    All copyrights belong to 888u unless special state
    取消
    微信二维码
    微信二维码
    支付宝二维码